Emergency Maintained LED Module
KYMAN® EMG4 emergency modules are primarily used to provide emergency lighting for most self-ballast KYMAN® LED lamps, with a maximum load of 80W. Installed as a maintained unit, the KYMAN® EMG4 emergency modules will provide power to KYMAN® lamps at 100% brightness. Should the mains power fail, the EMG4 module will switch to battery mode and dim down the lamp maintaining adequate emergency light levels for a duration of at least 3 hours.
The Emergency modules consist of a battery pack, an integrated emergency power module, charge indicator LED and a test switch. Built into the system is a discharge protection circuit, over current, short circuit and battery low voltage protection.
- Working voltage: 100VAC ~ 240VAC
- Working temperature: -20°C~+55°C
- Frequency: 50Hz/60Hz
- MAX load: ≤80W
- MAX input current: ≤1.5A
- Charging method: Trickle charge
- Battery: 7.2V 2.5Ah
|EMG7V2-4W||Maintained dim down LED emergency module|